Pour entrer sur le chat cliquez ici ou si le premier est en panne cliquez ici - Lisez les regles
du chat ici !
Pour parler de foot tapez /j #om (salon partenaire). Pour atteindre ce chat sur le réseau IRC Evolu.NET, c'est /j #ordinatueur ! Bon Ch@t...
| | (R) Impossible de lancer le serveur graphique sur Debian. |
| |
Posté le: Dim Nov 21, 2004 11:30 pm |
|
|
Bling182 |
Modérateur |
|
|
Inscrit le: 30 Nov 2003 |
Messages: 2213 |
Localisation: Somewhere in the sky |
|
|
|
|
|
|
Voila, j'ai essaye d'installer debian woody sur mon ordi.
Sauf que lors de l'initialisation du serveur graphique il me dit :
Fatal server error:
no screens found
sachant que bien sur j'ai un moniteur, et une carte graphique (une s3 trio64v+)
Si quelqu'un pouvqit me dire comment resoudre ce pb... Merci d'avance. |
|
|
|
|
Posté le: Lun Nov 22, 2004 8:27 am |
|
|
nirousse |
Grand Posteur |
|
|
Inscrit le: 14 Fév 2004 |
Messages: 773 |
Localisation: Besançon |
|
|
|
|
|
|
|
|
|
|
Posté le: Lun Nov 22, 2004 10:08 am |
|
|
Bling182 |
Modérateur |
|
|
Inscrit le: 30 Nov 2003 |
Messages: 2213 |
Localisation: Somewhere in the sky |
|
|
|
|
|
|
Citation: | et avec la sarge ? |
Je n'ai pas la sarge... Mais je peux essayer de la trouver... |
|
|
|
|
Posté le: Lun Nov 22, 2004 1:47 pm |
|
|
K@i-K@i |
Ordinatueur's Root |
|
|
Inscrit le: 01 Mar 2003 |
Messages: 3037 |
Localisation: Dans l'OrdinatUeur... |
|
|
|
|
|
|
Citation: | Sauf que lors de l'initialisation du serveur graphique il me dit :
Fatal server error:no screens found |
Il ne dit que ça ? Il n'y a rien d'autre ?
Citation: | et avec la sarge ? |
On va quand même essayer de voir d'ou vient le problème.
A vue de nez, problème de configuration. Tu n'as rien de plus ? |
|
_________________ @+
Kaï-Kaï
Rejoignez la communauté en direct sur #ordinatueur @ irc.ordinatueur.org / 6667 |
|
|
|
Posté le: Lun Nov 22, 2004 4:55 pm |
|
|
Yoka |
Modérateur |
|
|
Inscrit le: 19 Juin 2003 |
Messages: 3046 |
Localisation: Vesontio |
|
|
|
|
|
|
Donne-nous donc le contenu du fichier /etc/X11/XF86Config-4. |
|
_________________ Argumenter avec des imbéciles, c'est comme jouer aux échecs contre un pigeon. Peu importe votre niveau, le pigeon va juste renverser toutes les pièces, chier sur le plateau et se pavaner fièrement comme s'il avait gagné. |
|
|
|
Posté le: Lun Nov 22, 2004 5:02 pm |
|
|
thralia |
Nouveau |
|
|
Inscrit le: 22 Nov 2004 |
Messages: 1 |
Localisation: Anjoutey |
|
|
|
|
|
|
jette un oeil sur /var/log/XF86Config*.log
il devrait te dire à quel niveau il y a une erreur (à quelle ligne) |
|
|
|
|
Posté le: Lun Nov 22, 2004 6:04 pm |
|
|
Bling182 |
Modérateur |
|
|
Inscrit le: 30 Nov 2003 |
Messages: 2213 |
Localisation: Somewhere in the sky |
|
|
|
|
|
|
Citation: | Donne-nous donc le contenu du fichier /etc/X11/XF86Config-4. |
Il est un tout petit peu long...
Quelques pages seuement.
C ptetre la souris qui me fait beugurer mon truc en fait, paske elle est referencée deux fois.
Citation: | jette un oeil sur /var/log/XF86Config*.log
il devrait te dire à quel niveau il y a une erreur (à quelle ligne) |
Ce fichier est encore plus long que l'autre, et il me donne l'erreur que j'ai deja ecrite dans mon premier message. |
|
|
|
|
Posté le: Lun Nov 22, 2004 9:18 pm |
|
|
K@i-K@i |
Ordinatueur's Root |
|
|
Inscrit le: 01 Mar 2003 |
Messages: 3037 |
Localisation: Dans l'OrdinatUeur... |
|
|
|
|
|
|
Si je n'ai pas plus de détails sur l'erreur, je ne peux rien pour toi. |
|
_________________ @+
Kaï-Kaï
Rejoignez la communauté en direct sur #ordinatueur @ irc.ordinatueur.org / 6667 |
|
|
|
| | |
Posté le: Lun Nov 22, 2004 11:48 pm |
|
|
Bling182 |
Modérateur |
|
|
Inscrit le: 30 Nov 2003 |
Messages: 2213 |
Localisation: Somewhere in the sky |
|
|
|
|
|
|
Voila le contenu du fichier XF86Config-4 , demandé par Yoka :
Code: | [bling182@Bling182 floppy]$ cat XF86Config-4
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "s3virge"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-50
VertRefresh 43-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
### END DEBCONF SECTION
|
Voici le contenu du fichier XFree86.0.log : (tre tre long !!! j'en ai coupe une partie...)
Code: | [bling182@Bling182 floppy]$ cat XFree86.0.log
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Nov 23 01:05:56 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 9
(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7100 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 4005,4000 card 4005,4000 rev 00 class 04,01,00 hdr 00
(II) PCI: 00:09:0: chip 5333,8811 card 0000,0000 rev 54 class 03,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1106,3043 card 1186,1400 rev 06 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:9:0) S3 Trio32/64 rev 84, Mem @ 0xf8000000/26, BIOS @ 0xffef0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xffeef800 - 0xffeef87f (0x80) MX[B]
[1] -1 0 0xffef0000 - 0xffefffff (0x10000) MX[B](B)
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[4] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[5] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Inactive PCI resource ranges:
[0] -1 0 0x00004000 - 0x0000401f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xffeef800 - 0xffeef87f (0x80) MX[B]
[1] -1 0 0xffef0000 - 0xffefffff (0x10000) MX[B](B)
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[4] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[5] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x00004000 - 0x0000401f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xffeef800 - 0xffeef87f (0x80) MX[B]
[6] -1 0 0xffef0000 - 0xffefffff (0x10000) MX[B](B)
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[11] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[12] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[13] -1 0 0x00004000 - 0x0000401f (0x20) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="Kevin Brosius"
compiled for 4.1.0.1, module version = 1.6.13
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
S3VIdentify
(II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 00:09:0
S3VProbe begin
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
|
G pas de XFree86Config*.log |
|
|
|
|
| | |
Posté le: Jeu Mar 31, 2005 6:59 pm |
|
|
Yoka |
Modérateur |
|
|
Inscrit le: 19 Juin 2003 |
Messages: 3046 |
Localisation: Vesontio |
|
|
|
|
|
|
|
_________________ Argumenter avec des imbéciles, c'est comme jouer aux échecs contre un pigeon. Peu importe votre niveau, le pigeon va juste renverser toutes les pièces, chier sur le plateau et se pavaner fièrement comme s'il avait gagné. |
|
|
|
Posté le: Jeu Mar 31, 2005 7:18 pm |
|
|
Bling182 |
Modérateur |
|
|
Inscrit le: 30 Nov 2003 |
Messages: 2213 |
Localisation: Somewhere in the sky |
|
|
|
|
|
|
Ouais, G installé la debian sarge ave la netinstalle....
Et ca a marché niquel |
|
|
|
|
Posté le: Ven Avr 01, 2005 12:53 pm |
|
|
Yoka |
Modérateur |
|
|
Inscrit le: 19 Juin 2003 |
Messages: 3046 |
Localisation: Vesontio |
|
|
|
|
|
|
Probablement le pilote de la Woody qui était trop vieux.
De tout façon la Woody est totalement dépassée à l'heure actuelle.
Je règle le sujet. |
|
_________________ Argumenter avec des imbéciles, c'est comme jouer aux échecs contre un pigeon. Peu importe votre niveau, le pigeon va juste renverser toutes les pièces, chier sur le plateau et se pavaner fièrement comme s'il avait gagné. |
|
|
|
Posté le: Ven Avr 01, 2005 1:00 pm |
|
|
Bling182 |
Modérateur |
|
|
Inscrit le: 30 Nov 2003 |
Messages: 2213 |
Localisation: Somewhere in the sky |
|
|
|
|
|
|
Citation: | De tout façon la Woody est totalement dépassée à l'heure actuelle. |
Sarge powwwwwer !
Citation: | Probablement le pilote de la Woody qui était trop vieux. |
Ouais, possible, pourtant c'etait une vieille carte graphique aussi.... S3 trio 64V+ avec 2 mo de memoire video....
Citation: | Je règle le sujet. |
Ok |
|
|
|
|
| | |
Posté le: Ven Avr 01, 2005 2:14 pm |
|
|
Yoka |
Modérateur |
|
|
Inscrit le: 19 Juin 2003 |
Messages: 3046 |
Localisation: Vesontio |
|
|
|
|
|
|
Bling182 a écrit: | S3 trio 64V+ avec 2 mo de memoire video.... |
Je n'avais pas vu ça sous cet angle. C'est plutôt toi qui avais commis une erreur alors. |
|
_________________ Argumenter avec des imbéciles, c'est comme jouer aux échecs contre un pigeon. Peu importe votre niveau, le pigeon va juste renverser toutes les pièces, chier sur le plateau et se pavaner fièrement comme s'il avait gagné. |
|
|
|
| | |
Forum Ordinatueur ! http://forum.ordinatueur.org Index du Forum -> Software / Logiciel |
Vous ne pouvez pas poster de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets dans ce forum Vous pouvez éditer vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum Vous ne pouvez pas joindre de fichier dans ce forum Vous pouvez télécharger des fichiers dans ce forum
|
Toutes les heures sont au format GMT + 1 Heure
Page 1 sur 1
|
|
|
|